Difference between revisions of "LURCH Restyling"

Revision as of 16:47, 1 October 2010

This page describe the process of restyling the LURCH wheelchair [LURCH].

Only one of the two pc-bricks is mantained on new lurch architecture. It's a Intel CoreDuo with an Ubuntu 9.10 installed.

The 7-inch touchscreen monitor (Xenarc 700TSV), 800x480 resolution (16:10 AR) was configured using the drivers provided by the manufacturer.

Lurch pc is equipped with a wireless usb device.

It is able to connect automatically to the wireless network named (SSID) "lurch". This network is provided by the DLink Router

IP (v4) is obtained by fixed DHCP. For lurch pcbrick is 192.168.0.5

the router ip is 192.168.0.100, you can access to it by a browser to manage its configuration.

Now you can use a vnc client (like vinagre) to access the remote desktop

see the discussion of this page (which is not of public domain)

@@ Line 10: / Line 10: @@
 == Remote Connection ==
-Lurch pc is equipped with a wireless usb device and a ''ad hoc'' net named ''LurchNet'' was created using the Ubuntu Network Manager.
+Lurch pc is equipped with a wireless usb device.
-IP (v4) is fixed for the lurch pc to 192.168.0.1
+It is able to connect automatically to the wireless network named (SSID) "lurch". This network is provided by the DLink Router
-You can connect to this network, but you need to create manually the network connection.
+IP (v4) is obtained by fixed DHCP. For lurch pcbrick is 192.168.0.5
-Specify:
-* SSID: lurchNet
-* type: adHoc
-* IP: 192.168.0.n, with n between 2 and 254
-* mask: 255.255.255.0
-Now you can use a vnc client (like vinagre) to access the remote desktop (the password is the same of lurch user on pc, see the ''discussion'' of this page)!
+the router ip is 192.168.0.100, you can access to it by a browser to manage its configuration.
+Now you can use a vnc client (like vinagre) to access the remote desktop
+=== passwords and accounts ===
+see the ''discussion'' of this page (which is not of public domain)