Useful Circuits
--- WORK IN PROGRESS! ---
In this page you can find a set of useful circuits that you may need to develop your project. Most of them are designed using CadSoft EAGLE PCB and can be printend in our lab without the need of an external PCB supplier.
Contents
IC Adapters
Interface Circuits
USB - Serial adapter
This is an FTDI FT232RL based USB - Serial adapter you can use to access serial devices (0-5V levels, NOT RS232) via a standard USB port. At one side of the circuit there is a mini-USB connector, while at the other side you can find a pin header with 6 contacts:
Cable
The complete list of cable for camera connection and/or power is under construction. You can partecipate listing below which cables are you using...
| PIN # | Function |
|---|---|
| 1 | serial RXD |
| 2 | serial TXD |
| 3 | GND |
| 4 | 3.3V output from FT232RL |
| 5 | serial level select (3.3V / 5V) |
| 6 | 5V output from USB connector |
You must connect pin number 5 to pin number 4 (3.3V) OR to pin number 6 (5V) to select the voltage levels of the serial port. If you leave pin number 5 disconnected the adapter will not work.
