Roomba - vacuuming robots
From AIRWiki
Revision as of 16:56, 6 May 2010 by ThomasFerrari (Talk | contribs)
Roomba is a low-cost robot produced by iRobot. It is intended to be a commercial cleaning robot, however with little to no modification it can become a powerful educational/hobbyist robotics platform.
Contents
Sensors & Actuators
The Roomba comes with these basic sensors:
- Four IR based cliff sensors
- Two bump sensors
- One wall sensor
- A top mounted IR sensor. Used by Virtual Walls, Docking Station, and Remote Control
- One Dirt Detector (acoustic impact). Some Roombas have two.
The Roomba is sold commercially as a mobile vacuum cleaner, thus it also has these actuators:
- Two wheels drive with differential drive
- One main brush motor
- A side brush motor
- A Vacuum motor.
Communication protocol
The Roomba proprietary Serial Command Interface is available here: Roomba SCI.
Hacking the Roomba
Make your own Roomba-serial, Roomba-USB or Roomba-bluetooth dongle.
Schedule
If you need to move a Roomba from the lab, you should first ask to Andrea Bonarini, and then fill in the table below.
| ID | Test | Notes | Where/Who | Project |
|---|---|---|---|---|
| #1 | OK | AIRLab | ||
| #2 | OK | AIRLab | ||
| #3 | Collaudato (Matteo) | AIRLab | ||
| #4 | Paolo Belluco | |||
| #5 | KO (bumper) | AIRLab | ||
| #6 | KO (bumper) | AIRLab | ||
| #7 | KO (alimentazione) | AIRLab | ||
| #8 | Collaudato (Simone) | AIRLab | ||
| #9 | Collaudato (Martino) | Thomas Ferrari |
