Talk:Effects of Continuous and Discrete Perception and Decision in Exploration
Installazione di ROS e configurazione dell'ambiente operativo
1. Ambiente operativo (server università)
Ubuntu 8.04.4 LTS
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu 8.04.4 LTS"
Linux jobe 2.6.24-28-server #1 SMP Wed Nov 24 09:30:54 UTC 2010 x86_64 GNU/Linux
2. Installazione di Ros
Source Install
You will first need to setup your sources.list file to accept Debian packages from the ROS server.
Ubuntu 8.04 (Hardy):
sudo sh -c 'echo "deb http://code.ros.org/packages/ros/ubuntu hardy main" > /etc/apt/sources.list.d/ros-latest.list'
NOTE: After installing ROS on Hardy, some additional libraries will need to be installed. Make sure to follow the steps in Install Additional ROS Dependencies below.
Set up your keys:
wget http://packages.ros.org/ros.key -O - | sudo apt-key add -
Installation
Make sure you have re-indexed the ROS.org server:
sudo apt-get update
There are many different libraries and tools in ROS. We provided four default configurations to get you started. You can also install ROS stacks individually.
PR2: ROS plus PR2-specific stacks, including PR2 simulator.
sudo apt-get install ros-boxturtle-pr2
Note: You will get a prompt about hddtemp: you can safely answer no to the prompt if you are not installing on an actual PR2. To avoid getting the prompt, you can set the debconf selection ahead of time:
echo "hddtemp hddtemp/daemon boolean false" | sudo debconf-set-selections
Install Additional ROS Dependencies (Hardy Only)
Not all of the dependencies for ROS on Ubuntu Hardy are available via apt, so you will need to compile and install boost and log4cxx into /opt/ros. This can be done very easily using rosdep:
. /opt/ros/boxturtle/setup.sh
rosdep install ros
Environment Setup
It's convenient if the ROS environment variables are automatically added to your bash session every time a new shell is launched:
echo "source /opt/ros/boxturtle/setup.sh" >> ~/.bashrc
. ~/.bashrc
3. Installazione del tool di installazione
Prerequisites To install the tutorials you will need at least boxturtle-base installed before running the following, with it setup in your environment. Go back to boxturtle/Installation if you have not installed boxturtle-base.
Environment
If you are using binary installs:
. /opt/ros/boxturtle/setup.sh
Install tool
wget --no-check-certificate http://ros.org/rosinstall -O ~/rosinstall
chmod 755 ~/rosinstall
4. Completamento dell’installazione
Creazione di un nuovo package
Now we're going to go into your home or project directory and create our bosch-ros-pkg package.
Note that your installation of ROS is likely write-protected; in any case, it is unwise to modify the base installation without specific reasons. Instead you should create a new path in your home directory and prepend it to your ROS_PACKAGE_PATH as outlined below, and create additional packages in there. Prepending a path to ROS_PACKAGE_PATH causes all rosbash functions, such as roscd, to search through that path before moving on to the later paths, searching the default installation last. If you have trouble, it is useful to look at the ROS_PACKAGE_PATH documentation.
cd ~/
mkdir tesi_ros
export ROS_PACKAGE_PATH=~/tesi_ros:$ROS_PACKAGE_PATH
Note that the export line above must be run each time you open a new terminal ( unless you edit your .bashrc file to do so automatically).
Modifica del file .bashrc
sudo gedit ~/.bashrc
alla fine del file devono esserci:
source /opt/ros/cturtle/setup.sh
export ROS_PACKAGE_PATH=/home/dani/tesi_ros:$ROS_PACKAGE_PATH
Installazione del package explore_stage
Now go into the ~/tesi_ros directory then create your package:
cd ~/tesi_ros
mkdir bosch-ros-pkg
cd bosch-ros-pkg
Percorso svn package da scaricare:
Istruzione da eseguire:
svn co https://bosch-ros-pkg.svn.sourceforge.net/svnroot/bosch-ros-pkg/trunk/
Rendere il package raggiungibile
Now lets make sure that ROS can find your new package. It is often useful to call rospack profile after making changes to your path so that new directories will be found:
rospack profile
rospack find explore_stage
dovresti visualizzare: YOUR_PACKAGE_PATH/explore_stage
If this fails, it means ROS can't find your new package, which may be an issue with your ROS_PACKAGE_PATH. Please consult the installation instructions for setup from SVN or from binaries, depending how you installed ROS. If you've created or added a package that's outside of the existing package paths, you will need to amend your ROS_PACKAGE_PATH environment variable to include that new location.
Posizionarsi in explore_stage:
roscd explore_stage
e controllare che contenga i file necessari:
ls
Dovresti visualizzare:
config explore.launch explore_slam.xml explore.xml move.xml
explore explore_slam.launch explore.vcg manifest.xml
Posizionarsi nel package explore:
roscd explore
E lanciare il make:
rosmake exploration
Installazione di rx-tools e di Rviz
Once all the system dependencies are installed, we can build our package that we just created.
rosmake is just like the make command, but it does some special ROS magic. When you type rosmake beginner_tutorials, it builds the beginner_tutorials package, plus every package that it depends on, in the correct order. Since we listed rospy, roscpp, and std_msgs as dependencies when creating our ROS package, these packages (and their dependiencies, and so on) will be built by rosmake as well.
Utilizzo di rosdep install e di rosmake:
rosdep install rxtools
rosmake rxtools
rosmake rviz
roscd stage
Lanciare RVIZ per visualizzare l’esplorazione:
rosrun rviz rviz -d $(rospack find stage)/rviz/stage.vcg
Dopo aver lanciato RVIZ, aggiungere Ia sottoscrizione ai topic MAP e MARKERS per vedere la mappa esplorata, i goal e il tracciato del percorso seguito.
Lanciare l’applicazione
Posizionarsi in explore_stage:
roscd explore_stage
E lanciare l’applicazione:
roslaunch explore_slam.launch
In caso di errori con il lancio di stageros (SEGFAULT), modificare la seguente riga nel file explore_slam.launch, aggiungendo il parametro “-g” (che avvia stageros senza la visualizzazione grafica):
<node pkg="stage" type="stageros" name="stage" args="-g $(find bosch_worlds)/maze-noisy.world" respawn="false" output="screen"/>
